Commercial and Industrial Diesel Heater Rentals
Explore diesel heater rentals designed for the most demanding industrial applications. Our inventory of diesel-fuel-ready heaters can help you protect your people and product even in extreme conditions at remote sites. Our solutions are planned, tailored, and shipped to you.
We deliver industrial solutions built on trust. Our team of electricians, engineers, and other experts will plan your solution from the ground up. Each service starts with a site visit. We’ll assess your property, facility, and challenges to create a rental package that meets your needs.
Our Diesel Heating Solutions
Below, you can learn more about some of our diesel-powered heaters. This is just a small set of the temperature control solutions that we have available for rent. You can see other related solutions in our temperature control catalog. You’ll find chillers, air handling units, air conditioners, and more.

20 Ton Industrial and Event Portable Air Conditioner with Heat
Industrial Features:
- Unit comes with BOTH 20” round supply and return duct connections (with duct doors) as well as bolt-on supply diffusers and return louvers
- Scroll compressor with installed suction accumulators
- Direct drive High Static plenum fan
- ULTRA-Low Noise design
- Variable speed condenser and evaporator fans to allow for running at the lowest sound levels possible
- Rated cooling air flow of 6,500 cfm
- Air flow range of 4,000 to 8,000 cfm
- Hydrophilic-coated, non-lanced condenser fins
Additional Features:
- Hydrophilic-coated evaporator fins
- Stainless steel hardware
- Stainless Steel drain pan
- Permanently installed drain pan P-trap (protected within unit base)
- Integral heat package
- Available with 32 or 64kW of heat
- Stainless steel sheathed, hermetically sealed, finned tubular heating elements

10 Ton Industrial and Event Portable Air Conditioner with Heat
Industrial Features:
- Unit comes with 20” round supply and return duct connections (with duct doors) OR bolt-on supply diffusers and return louvers
- Scroll compressor with installed suction accumulators
- Direct drive High Static plenum fan
- ULTRA-Low Noise design
- Variable speed condenser and evaporator fans to allow for running at the lowest sound levels possible
- Rated cooling air flow of 4,000 cfm
- Air flow range of 2,000 to 5,000 cfm
- Hydrophilic-coated, non-lanced condenser fins
Additional Features:
- Hydrophilic-coated evaporator fins
- Stainless steel hardware
- Stainless Steel drain pan
- Permanently installed drain pan P-trap (protected within unit base)
- Integral heat package
- Available with 16 or 32kW of heat
- Stainless steel sheathed, hermetically sealed, finned tubular heating elements
We proudly stand behind all of our heaters and other temperature control equipment rentals. Our team understands them and can provide you with expert guidance on setting them up and achieving optimal performance.
That’s just one advantage you can enjoy when you choose to work with HOLT Industrial Rentals for climate control rentals, but as you’ll learn next, there are many more.
Why Work with HOLT Industrial Rentals When You Need Diesel Heaters?
It’s always a good idea to choose an experienced team when you need temperature control rentals, including flameless heaters. Our team has been developing industrial-grade rental solutions for years, and we strive to offer our customers all of the following advantages with every service:

Industrial-Ready Rentals
We rent out industrial-grade temperature control units that are powerful enough to meet the needs of industrial operations. They are most often combined with other power rentals to create comprehensive solutions.

Solutions Tailored to Every Job Site
No industrial operation has the same needs. Our team visits your site, including remote locations, to help you develop a temperature control plan that meets all your needs within your budget.

Professional Installation and Maintenance
Our experienced industrial technicians are highly involved from planning to installation and removal of your diesel heater rentals. Have your solutions handled and troubleshooted by professionals.

Complete Packages
In addition to towable air conditioners with heating, you may need power generators, air compressor solutions, and other industrial-grade equipment. We’ve got everything you need to create a solution designed for your industrial requirements.

Delivered Right to Your Site
Our rentals can be loaded and delivered throughout our service area. Our team can provide services to cities as well as remote sites that require off-road capability. The challenges of your site will be considered as part of your solution.

We Support Short or Long-Term Visions
Rent our industrial equipment on your schedule. Short-term rentals can help you manage emergencies, such as equipment failures and unexpected weather events, providing a valuable resource for managing these situations. We can also support remote sites for weeks or months.
How HOLT Industrial Rentals Delivers Solutions to You
We support you throughout the entire duration of your diesel heater rental. Discover how our technicians can help you achieve optimal power and maximum performance from your equipment. Every diesel heater rental service follows a simple four-step process.

HOLT Industrial Rentals can help you build and manage a solution for your heating needs. If you’re ready to take the next step and start assessing diesel heaters and other systems, simply contact our team to get started.

Assessment
Contact us by phone or through our online form to start a collaboration. We’ll need to know more about your needs and the resources you have available at your industrial, commercial, or remote sites. If we can help, we’ll introduce you to our rental fleet and schedule a project manager to visit your site for your initial assessment.
During the assessment, our project manager will review your site, including any additional rentals that may be necessary to create the solution you're looking for. Depending on the size of your facility, it may be necessary to network several units together. You may also need to provide supplementary power if your current power supply isn’t sufficient to handle both your operations and rentals. We can plan a rental setup that meets your needs and even recommend other rentals that can be combined into a total solution.

Installation
Our team goes the extra mile for clients by handling delivery and installation onsite. We can deliver your heaters or other rentals to many locations, and even off-road areas, depending on access. When our team is on the ground installing your rentals, we’ll verify that all existing and rental systems are working together seamlessly. We can identify any issues that may prevent your solution from functioning as intended.
Before our team leaves, we’ll confirm that your rentals are delivering optimized performance and ready to provide you with uninterrupted service.

Monitoring
You need to feel confident that your solution will continue to work, and we’re here to help. Monitoring is just another way that we make sure our solutions are right for your needs. We can continue monitoring your rentals after installation to watch for any error messages or changes in performance. Our team will verify that each rental continues to work as intended for your most critical applications.
Our team can address maintenance issues, including replacing any units that are not functioning correctly. Your operations run uninterrupted.

Pick-up & Removal
You don’t need to worry about taking your solution apart when your rental period is over. We provide that service as part of the rental. Handling it ourselves means you never need to worry about damaging the equipment or your facility when deconstructing the rentals.
When your rental is complete, you can trust our team to remove all rentals properly so that your facility is restored and ready for its next phase. Just as we can deliver solutions to most remote locations, we can pick them up.
Can We Create an Industrial Solution for You?We’ve Done it for Many Industries
Our industrial-grade rentals can be the right solution for many facilities. Explore our case studies to discover how we have supported facilities like those listed below, as well as many others.

Medical Facilities
Diesel heaters of different types can be necessary for pharmaceutical manufacturing and other medical environments. Our team has installed temporary heaters for numerous medical-related projects, and we can leverage that experience to build a solution that handles all your needs.

Chemical & Pharmaceutical Manufacturing
Keep chemical manufacturing operations running smoothly with industrial-grade heaters that seamlessly integrate into your facility's solution. You may be flame-free for these environments, but these models are also included in our selection of industrial temperature control solutions.

Remote Sites
Remote sites have challenges that most rentals can’t handle. Our industrial-grade heaters can be used to create the right environments for sensitive operations, even in remote locations. We deliver all of our rentals, including temperature control equipment, ourselves.

Oil & Gas
Our industrial rentals can support oil and gas facilities. You may need high-performance heaters to provide basic heating and cooling to your personnel or equipment in the field. These deliverable rental units can be set up fast at any remote sites.

Construction
Do you need heaters to provide comfort or function on your construction site? These important systems can keep everything moving on schedule and allow your personnel to work safely and comfortably in more weather conditions.

Power Plants
Rent heaters and other types of industrial rentals to help you manage your power plant operations. Our rental solutions can provide heating, air conditioning, and more when you need them to protect employees and products.

Batteries
You may need rental equipment that can work with generators and batteries. Our team provides technicians to install all of our solutions into any kind of power setup, including temporary ones.

Agriculture
Your agricultural operation may require heaters as part of seasonal solutions. Heaters with sufficient industrial capacity can fill the gap for the duration you need, without the high costs associated with acquiring new equipment.

Many More
You may never know you need a rental heater until it’s already an emergency. Our experience in planning solutions for various industries can help us develop a tailored one for your specific needs.
There’s more our team can do for you, but we need to know more about your industrial operations to make the best recommendations for you. With decades of experience in industrial systems and construction, you can be assured that we’ve developed solutions for facilities like yours.
How Else Can HOLT Industrial Help?
HOLT Industrial Rentals has everything industrial clients need to craft total solutions that consider heating, airflow, fuel efficiency, and other concerns. If you’re crafting a commercial solution for your factory, plant, or site, you may need all of the following types of rentals.
If you require heaters, you may also need additional supporting systems, such as industrial generators that can be delivered to your site or batteries to keep them running. Let our team of industrial experts develop a solution that includes all of the rentals you need.
Contact HOLT Industrial Rentals for a diesel heater Quote
Start building a solution for your business with HOLT Industrial Rentals. Our diesel heaters deliver industrial-level performance, and they are portable enough to be delivered wherever you need them. Contact us today to start planning a solution that begins with diesel-fueled heating.
Our team delivers solutions built on trust. We’ll discuss your needs and then schedule a site visit. We’ll use what we learn during the site visit to recommend high-quality compressors and other rentals and deliver your solution to you.
